Abrasives, Die Grinding Wheels, Discs, Cartridge Rolls, Pads
Malcolm G. Stevens, Inc. the “One stop shop for the Foundry Industry” We have what you need, when you need it.
Plain abrasive discs, 1/2 to 36 Diameter. When you apply the glue this could be as an alternative to PSA discs.
Paper discs, 10” to 36” diameter, Garnet abrasives on heavy paper backing. Used in woodworking trades.
PSA, Pressure-Sensitive Adhesive Discs, 1/2” to 30” diameter. Aluminum Oxide, Silicon Carbide, or Zirconia/Alumina materials.
Resin Fiber Discs, 4 1/2 to 9 1/8 diameter with or with out quick change adapter.
Mechanical Locking Discs, 3/4 to 3 diameter. are available with Roloc (TR or Type III) or Socatt (TS or Type III) adapters and are manufactured with Aluminum Oxide. Silicon Carbide or Zirconia/Alumina abrasive. They are also available in non-woven nylon, surface preparation discs for the removal of rust, blending surface flaws and other operations where the aggressiveness of cloth-backed abrasive is not needed.
Abrasive Cartridge Rolls
Straight cartridge rolls, 1/8” diameter to 1 1/2 diameter are made from premium Aluminum Oxide cloth backed abrasivs, tightly wound for long life in grinding, deburring and polishing operations. Also available with Silicon Carbide or Zirconia/Alumina grain
Tapered Cartridge rolls, full tapered or half taper are made from premium aluminum oxide cloth-backed tightly wound for long life in grinding, deburring and polishing operations. Also available with Silicon Carbide or Zirconia/Alumina grain
Tapered Cone Points, for those hard-to reach deburring needs. Made from premium Aluminum Oxide cloth-backed abrasive, tightly wound for long life. Also available with Silicon Carbide grain.Also available Flap Discs, Slotted Discs & Overlap Discs.
Square pads, with or with out quick-change threaded eyelets, 1/4”=12” thick, 1” to 3” square. Made from premium aluminum oxide cloth-backed abrasive, they are ideal for fast cutting and buffing operations. As the corners wear, new abrasive and cloth is exposed and the pad begins to work like a grinding wheel. Use for blending corners, channels and seams. Also available with Silicon Carbide grain.
Cross Pads also available.
Surface conditioning Stars, 1 - 1/2” to 4” diameter. Coarse to very fine non-woven material with scrim back with quick change threaded eyelet. Great for cleaning, polishing and light deburring on either I.D. or O. D. surfaces
Abrasive Die Grinding Wheels
Feature Key For Above:
Cut Off Wheels
Reinforced Cut off wheels full line from 1” - 26” diameter in all popular thicknesses. Made of the highest quality fiberglass available.
Non Reinforced Cut off wheels for precise cuts, exact sizing and high quality finishes, 1” - 26” diameter available.
Bonded abrasives for all your cutting and grinding applications. We offer a complete line of bonded abrasives products for a wide variety of applications and industries, from fabrication and foundries, to construction and heavy industrial.
LB-2000 for Medium- to Heavy-Duty Machining
Recommended for use in general machining, drilling and tapping of small diameter holes (under 5/8), sawing of solids up to 6 in diameter, broaching, and spline rolling. Suitable for use on all metals except aluminum requiring post-heat treating. Available in one gallon (4 per case) and 55-gallon sizes.
LB-5000 For Heavy-Duty Machining of Non-Ferrous Metals
Recommended for machining and sawing of non-ferrous metals. May be used on aluminum requiring post-heat treating (when properly applied). Meets FDA and USDA specifications for use in food processing areas with no food contact. Available in one gallon (4 per case) and 55-gallon sizes.
LB-6800 For Medium-Duty Machining of Aluminum
Designed for sawing and machining of aluminum. LB-6800 outperforms conventional fluids for aluminum due to superior lubricity and low odor. Contains no hazardous ingredients, is non-toxic, and is biodegradable. LB-6800 is non-staining and easily burns off during post-heat treat processes. Available in one gallon (4 per case) and 55-gallon sizes.
Accu-Clean safely removes oil, grease, dirt, and grime from any surface, including cement all metals, all painted surfaces, upholstery, clothing, and plastics. Non-toxic, non-caustic, and biodegradable, it can clean without contaminating water and drain systems. Accu-Clean contains no hazardous ingredients, no solvents, and no Butyl Cellosolve, so it is safe for your employees, equipment, and the environment. Water-soluble and highly concentrated. Available in one gallon, five gallon, and 55-gallon sizes.
Through the-tool micro lubrication